Dishwashers, laundry

Body and tank stainless steel construction 18/10 AISI 304, 12/10 thick. Tunnel composition: 1 Pre-Wash (65 l) - wash arms: 3 upper + 2 lower; 1 Wash (95 l) - wash arms: 4 upper + 4 lower; 1 Rinse (300 l) - rinse arms: 1 upper + 1 lower. Completely automatic. Control of the belt-towing system, provided with clutch system that in accidental case stops automatically the belt. Upper and lower fixed pre-washing (40°C), washing (60°C) and rinsing systems (85-90°C), rinse system with optimized consumption. S.S. rinse and wash arms can be disassembled and interchanged. The new concept WASHING ARMS WITH BALANCED JET allow to uniformly distribute the pressure of water on the dishes, ensuring therefore effective washing results. Double skin with thermic and acoustic insulation. Drawing washing tanks with rounded edges; guarantee the highest hygiene. STAINLESS STEEL self-draning inclined washing pumps. The drain valve allows to automatically empty the tanks. Counterbalanced door. Inspection door, placed at the entry and at the exit, for easy access to the below tanks for cleaning. New electronic touch control panel, with two separate interactive displays, dedicated to temperature management only! Types of management: for the operator, for the maintenance technician and factory data. Front panel composition: low tension keyboard drives, a touch control display indicates the temperatures of different tanks, PCB-board programming according to the type of machine and to the customer’s demand, alerts and functions showed on a display, warning light indicating “door open”or absence of overflow (when present), limit switch alarm, water-fail alarm (tank loading), fluxmeter alarm (when present), thermic relays alarm motors, signaling of various functions and cycles starting, rinse boiler filling at daily starting, speed selection push button or machine running with motor drive off, drying push button and light (when present), pre-rinse push button and light, autotimer push button and light (when present), rinse light, fluxmeter light, basket entry light (when present), washing tank water level light, programming of maintenance operations, storage of dishwasher’s total and partial working hours. Solid, high temperatures resistant, non-deformable belt conveyor 625 mm width (for LINEAR-ek-L 850 mm possible) with stainless steel chain and roll in nylon for a silent sliding; frontal maintenance; entry and exit splash shield, that avoids water splashed and steam leakages; load and unload tables with slanted bottom; entry and exit table for dishes support; start and stop button in entry-exit machine; rinse economizer (the photocell on entry table therefor blocks the leak of hot rinse water if on the belt there are no dishes); automatic tank loading; thermometers for automatic control temperatures of the wash- and rinse water; tank and pump filters; insulated boiler. SAFETY. Adjustable and strong feet; emergency pushbutton in entrance and exit of the machine; pressure switch protection for heating elements; thermic protection for wash pump; automatic stopping of conveyor in case of foreign bodies; low voltage control circuit (24V) for greater safety during work operation; dishes (stop with end micro-switch on the exit table); door opening safety device; emergency lamp. Energy regeneration with heat pump with simple, double and triple action exploiting the heat produced in the cooling cycle, which allows to constantly regenerate energy from the hot air produced in the machine. TECHNICAL SPECIFICATIONS. One automatic speed: 1,57 mt/m'; hour capacity: 3100 dishes/h; max dimensions for wash: 430 mm height - 625 mm width. Rinsing: 300 LT/H. Accessories: 1 generic basket; 2 cutlery baskets. Optionals: drying tunnel; steam condenser; booster pump; extension table (entry-exit); heat recoverer. Cold water connection upon request.