Dishwashers, laundry

Body and tank stainless steel construction 18/10 AISI 304, 12/10 thick. Tunnel composition: 1 Wash (230 l) - wash arms: 6 upper + 4 lower + 2 side arms; 1 Rinse (550 l) - rinse arms: 1 upper + 1 lower. Completely automatic. S.S. rinse (85÷90°C) and wash (60°C) arms with studs molded towards the outside allowing to increase the opening width of the washing jet, and also allowing the washing arms to be completely emptied of any unwanted residues, easy to disassemble and change. The new concept WASHING ARMS WITH BALANCED JET allow to uniformly distribute the pressure of water on the dishes, ensuring therefore effective washing results. Double skin with thermic and acoustic insulation. Slanted insulated tank with rounded edges. Stainless steel self-emptying wash pumps. The washing flow regulator allows to gauge the washing strength intensity (useful for glasses washing), placed inside the pre-washing and washing zones by the lower washing arms. Counterbalanced door. Inspection door, placed at the entry and at the exit, for easy access to the below tanks for cleaning. New electronic touch control panel, with two separate displays, dedicated to temperature management only! Types of management: for the operator, for the maintenance, and for technician and factory data. The interactive display allows you to view the temperatures and program all the values to be set for all the functions available. Solid, high temperatures resistant, non-deformable belt conveyor 625 mm width (for LINEAR-ek-L 850 mm possible) with stainless steel chain and roll in nylon for a silent sliding. Frontal maintenance. Water protection. Loading modular bracket with table for dishes bearing. Automatic tank loading. Electronic thermometers for automatic control temperatures of the wash and rinse tanks. Start and stop button in entry-exit machine. Rinse economizer  (the photocell on entry table therefor blocks the leak of hot rinse water if on the belt there are no dishes). Tank and pump filters. Insulated Boiler. Safety. Adjustable and strong feet. Flowmeter. Emergency Pushbutton in entrance and exit of the machine. Pressure switch protection for heating elements. Thermic protection for wash pump. Automatic stopping of conveyor in case of foreign bodies. Low voltage control circuit (24V) for greater safety during work operation. Dishes (Stop with End Micro-switch on the exit table). Door opening safety device. Emergency lamp. Energy regeneration with heat pump with simple, double and triple action exploiting the heat produced in the cooling cycle, which allows to constantly regenerate energy from the hot air produced in the machine. Technical specifications: automatic speeds - 1st - 0,849 mt/m', 2nd - 1,390 mt/m'. Max dimensions for wash: 430 mm height - 850 mm width. Wash pump: n°02 x 3 kW. Tank heating: 12 kW (electric) 28 kg/h (steam). Boiler heating: 27 kW (55°) 39 kW (water 12°) (electric); 28 Kg/h (55°) 48 kg/h (12°) (steam). Geared motor: 0,15 kW. Cycle water consumption: 320 l/h. Hardness: 5-10°F. Noise: dB 69. Options: drying tunnel, steam condenser, pressure pump, extension table (entry-exit), heat recoverer, cold water connection upon request; removable front drawer for PRL-CN pre-washing unit, with two 50 mm deep inox filters (mesh ø3 mm).